You can find lots of blank wooden objects in the wood crafting section of an arts and craft store.
For a more professional touch, lightly sand the edges and corners of your wooden block or board. This give it a softer look. Thoroughly wipe away the wood dust once you’re done sanding. Otherwise, the dust might get stuck in the Mod Podge. [3] X Expert Source Nicole BolinCrafts & DIY Specialist Expert Interview. 9 September 2020.
Use acrylic paint in a color that matches the photograph. Extend the paint onto the front of the board. This way, if you accidentally cut the photo too small, you won’t see any raw wood.
Mod Podge comes in different finishes. Choose one that you like the best: matte, glossy, or satin.
Let the first coat of acrylic paint dry before applying the next one.
Your picture will come out in reverse. If this bothers you, mirror it first using an image editing program. [14] X Research source If your image has a white border, it might be a good idea to trim it off, especially if you are using photo medium. [15] X Research source
Rinse the wood under the water often to get rid of any clumps of paper. [19] X Research source If there is any residue, let the wood dry, then repeat the process.
You can use Mod Podge in a different finish for this step, such as glossy or satin. Alternatively, you can seal the transferred image with clear, acrylic sealer.
It is not recommended to transfer images onto multiple sides for this method. If you get the Mod Podge wet, it may melt off.
